Setting up RIP devices
Last modified on 22 September 2014 10:00 AM
Can jobs instigated by the RIP be tracked by PaperCut?
Some RIPs have the ability to re-send, proof, or edit jobs directly on the RIP. These jobs, because they don’t pass via the server will not be tracked by PaperCut. There are two options depending on the type of RIP:
Sites conducting this type of proof → print procedure in a RIP environment may like to consider using the manager mode popup to manually allocate costs. The manager mode popup will trigger/display when the proof is printed to the PC. The popup can then be filled in to assign extra costs/functions that will be applied at the RIP layer such as:
I have a RIP device. How can I use PaperCut to track printing via the RIP?
The key is to set up the RIP between the server running PaperCut and the physical printer. The job will move from the workstation to the server (running PaperCut) via the server’s shared queues. The server then directs the job to the RIP which in turn directs the job to the physical printer.
Workstation → Print Server → RIP → Printer
Setting up a RIP device for use with PaperCut generally involves the following steps:
PaperCut can then audit and control access to the print queue(s). Once the job is spooled to the server, the job will be forwarded to the RIP device, which in turn forwards them to the physical printer. Note that any job manipulation carried out on the RIP (cancellation, duplication, partial printing) will not be reflected in PaperCut as the job has already been tracked and charged.