Automated PaperCut Server Deployment
Last modified on 11 August 2020 10:23 PM
This article discusses automating the deployment and installation of the PaperCut Application Server on multiple servers. It is intended to be read by IT System Administrators that will be installing PaperCut NG/MF automatically on multiple independent servers, however it may also be a good reference if you are intending to install PaperCut on a headless server like Windows Server Core.
For information about automating the PaperCut Client deployment using methods such as zero-install, please consult the manual. There is also a section about automating a Secondary Print Server installation. To automate or upgrade Site Servers, check out the steps in the FAQ here.
PaperCut has been deployed on a state-wide and district-wide basis in a number of regions. Some of these deployments have involved a progressive or simultaneous roll-out across thousands of sites and networks. PaperCut provides a number of automated and pre-configured install mechanisms to help maintain a common and consistent server environment. This includes:
The following batch file will automatically start the PaperCut NG installer installing into C:\Program Files\PaperCut MF. Feel free to customize that path if you would like a different installation directory, or if this is PaperCut NG.
REM Installing PaperCut pcng-setup.exe /TASKS="full" /SILENT /DIR="C:\Program Files\PaperCut MF" REM Installation complete. REM Open browser to http://localhost:9191/ to complete configuration. pause
There are different types of installations from the main executable used to install PaperCut. One of the following 4 must be selected. (Please note that multiple installation types can’t be specified within one installation.):
Install the default option of a PaperCut Application Server.
Installs a PaperCut Secondary Server.
Installs a PaperCut Sandbox Server.
Installs a PaperCut Site Server.
Some other command line switches include:
When a setup is set to very silent the installation progress window is not displayed (this runs entirely in the background). Use this instead of /SILENT.
Periodically, we may introduce message boxes to be displayed during the installation process (such as the 32-bit warning in version 19). To run a completely silent installation, run this switch in conjunction with /VERYSILENT.
Prevents the user from cancelling during the installation process, by disabling the Cancel button and ignoring clicks on the close button.
Defines the default install location. Leave this off to install into the system’s default, i.e. the Program Files folder for Windows.
Stops a Shortcut from being added to Desktop during the installation.
If the supplied digitally signed license file is renamed to
After PaperCut NG/MF is installed for the first time and a web browser is opened, the system will enter the initial configuration wizard (this does not apply to upgrades). The configuration wizard can be pre-populated avoiding the need to complete the full wizard and/or help guide the user in selecting the correct options that match your given SOE.
To pre-populate the setup wizard, create a plain text file called
Windows (any PaperCut version) and Linux (PaperCut version 19.1.0 and above):
Linux (PaperCut version prior to 19.1.0):
Use the following file format to define the defaults:
# # The default admin password. This password will be one-way encrypted and then stored # in the [app-path]\server\server.properties during the installation process. # admin-password=testing # # The type of your organization. Set to one of the following: # Educational # Commercial # Professional # org-type=Educational # # Set to Y if the print control module should be enabled. # enable-print-module=Y # # Set to Y if the internet control module should be enabled. # enable-net-module=N # # The default color page cost defined initially on all printers. # Set if the print control module is enabled. # print-default-color-page-cost=0.10 # # The default grayscale page cost defined initially on all printers. # Set if the print control module is enabled. # print-default-grayscale-page-cost=0.05 # # The default internet cost per Mb. # Set if the Internet control module is enabled. # net-default-mb-cost= # # The default internet time cost. # Set if the Internet control module is enabled. # net-default-time-cost= # # The default internet time interval in seconds. # Set if the Internet control module is enabled. # net-time-interval-seconds= # # The starting credit assigned to all users. # initial-user-credit=10.00 # # Set to Y if all users should be initially restricted. # users-initially-restricted=Y # # Define the user import/sync source. Options include: # WIN_AD = Windows Active Directory # WIN_STD = Windows Standard # UNIX_PAM = Unix Standard # MAC_PAM = Mac Standard # user-sync-source-type=WIN_STD # # Set to Y if users should be imported from a group rather than # the whole domain (default). # user-sync-import-from-group=N # # By default, the User/Group Sync Source displays all groups in the domain. # If the user source is WIN_AD, this option may be modified to only list groups # from a particular organization unit. # e.g: myorganization.local/Import OU/Sub Import OU # user-sync-ad-group-ou-filter= # # The name of the import group. Set only if the import-from-group # option is selected. user-sync-source-group= # # If the user source type is WIN_AD, this option may be used to # define multiple domains as user sources. This value should be # a semicolon (;) separated list of domains. e.g. # mydomain1.com;mydomain2.com # user-sync-ad-multiple-domains= # # Set to Y if the configuration wizard will be displayed at the last screen # ready for the user/admin to press the Finish button. # Set to N if you'd like the user to review the suggestions. jump-to-verify-page=Y # # Set to Y if the Back/Previous button should be disabled. This # will prevent the installer from being able to change the # defaults in the configuration wizard. This should be used in # conjunction with the jump-to-verify-page option. disable-back-button=N