News Categories
News
PaperCut MF 17.4.2 (Build 42404)
Posted on 05 December 2017 09:47 AM

Enhancements:

  • Ricoh (SmartSDK):
      • Support for Integrated Scanning. The all-in-one intuitive user interface provides a consistent and seamless experience.
      • Support for USB tracking.
      • Support for customizing the logo, and more.
  • Mobility Print:
    • Support for Linux and macOS environments by the Mobility Print server.
    • DNS setup is even easier with a new improved workflow in the Mobility Print Admin interface to help you configure DNS-SD.
  • Windows Print Provider: Added an option to change print queue error monitoring to SNMP (ErrorPollMethod=snmp in print-provider.conf). This speeds up the time on Fast Release Stations, Standard Release Stations and all web-based Release Station interfaces to:
    • block the release of print jobs when a print queue is in error, and
    • stop blocking the release when the print queue is no longer in an error state.
  • Improved the wording of the "Make shared account/PIN code visible" security options in the Account Options area on the Options > General page.
  • Web Print Sandbox mode security**: The confg key that controls document macros is now disabled by default (web-print.disable-macros).
  • Basque translations are now available for Ricoh (SDK/J) version 6.0.4 and the PaperCut MF User web interface.

Fixes:

  • Mac and Linux: Fixed an issue where the printer toner level, model, and serial number was not updated on the Printer Details page for printers using some Xerox drivers.
  • Windows Print Provider: Fixed a rare issue that caused Print Provider to crash if PDL transforms were enabled.
  • Microsoft Applications on Windows 10: Fixed a rare issue that caused print jobs not to be tracked when printing to Windows servers with server side rendering, when Hide Document Names have been activated.
  • HP printers on a Windows 10 or Windows Server 2016 print server: Fixed an occasional issue that caused an incorrect number of pages to be reported when printing multiple copies.
  • Fixed an issue preventing device license numbers on the About page from updating after adding a new device.
  • Site Server: Fixed an issue to improve Site Server registration and sync performance in organisations with many Site Servers where some Site Servers some times incorrectly switched to the offline mode.

Copier / Device Integration:

Canon (MEAP) version 1.3.1*:

      • Added support for C90xx and C70xx models.
      • Improved Russian translation coverage.

Fuji Xerox (AIP) / Dell (AIP):

      • Added support for OmniKey 5127CK and OmniKey 5427CK card readers.

HP (FutureSmart 4+ Print Only):

      • PaperCut MF now supports HP FutureSmart 4+ Single Function Printers (SFP), offering a simplified setup that doesn't require manual deployment of the embedded solution on the device.
        Note: Existing HP FutureSmart licenses can be used for the new HP FutureSmart 4+ SFPs. However, if you do not have an existing HP FutureSmart license, you can purchase a lower-cost SFP license.

HP (FutureSmart) version 1.2.0*:

      • Added support for models with high resolution (1024 x 768) screens.
      • Fixed an issue when using touchscreen scrolling that incorrectly selected and deselected held print jobs on the PaperCut MF Print Release screen.
      • Added the following new config keys:

        Description

        Config key

        Specify the Windows Domain to authorize users when using the native scan-to-network functionality. ext-device.hp.windows-domain
        Modify the network connection timeout period and retry attempts ext-device.hp.network.timeout-millis
        ext-device.hp.network.timeout-retries

HP (OSA):

      • Fixed an issue that incorrectly allowed users to access the device's web interface.

Konica Minolta (OpenAPI):

      • The certified PaperCut MF connector version is now 3.4.0.
      • Standard:
        • Added more detail and clarity to the message displayed when a user who is logged in to two devices simultaneously, releases a job from one device that has already been released from the other device.
        • bizhub PRO 1100 devices: Fixed an issue that created unnecessary text line breaks in the login instructions on the native device's login screen.
      • i-Option:
        • The cursor on the PaperCut MF login screen now automatically jumps to and highlights the relevant field that needs to be entered.
        • Devices enabled with fast access and release all jobs on login, will now display a message about the number of jobs automatically released.
        • Fixed an issue that prevented a custom "Guest" button label from being displayed.
        • Removed an unnecessary Device Status error message during PaperCut MF device registration.
        • The "Cancel" button has been removed from the Scan-in-Progress screen to prevent users from attempting to cancel scan jobs in progress.
        • Fixed an issue that caused scan jobs to be charged but not delivered when users logged out before pressing "Send".
        • Fixed an issue that caused scan jobs to be incorrectly charged twice, when the device's hard "Start" button was pressed more than once to initiate the scan.
        • Fixed an issue that prevented users from navigating from the Print Release screen to the PaperCut MF Home screen.
        • The checkbox text "Scan multiple pages from Glass" on the PaperCut Scan Details / Scan Settings screens has now been changed to "Prompt for more pages".
        • The button text "Device Functions" on the PaperCut Scan Details / Scan Settings screens has now been changed to "Continue".
        • Added more detail and clarity to the "Would you like to scan more?" message on the screen with the "Scan more" or "Send" options.
        • Improved performance and UI responsiveness.
        • Added the following new config keys:

          Description

          Config key

          Suppress the display of the PaperCut MF Home screen after login. ext-device.konica-minolta.browser.suppress-home-screen
          Display a "Logout" button on all PaperCut MF screens on the device, to allow users to terminate an active session. ext-device.konica-minolta.enable.screen-logout-button
          Set the way PaperCut MF will handle other third party pull print and scan applications already on the device, during device registration. ext-device.konica-minolta.allow-third-party-pullprint-apps
          ext-device.konica-minolta.allow-third-party-scan-apps
          Set the way authentication credentials are submitted, based on the type of keyboard being used - a soft on-screen keyboard or an external hard keyboard. ext-device.konica-minolta.login.enable-auto-submit
          Configure the default setting of the "Prompt for more pages" checkbox on the PaperCut Scan Details / Scan Settings screens. This also impacts the Integrated Scanning workflow to display the screen with the "Scan more" or "Send" options. ext-device.konica-minolta.scan.prompt.checkbox.checked
        • Standard and i-Option:
          • Fixed an issue that prevented restricted users with account balances less than 0.001 from accessing device functions.
          • Polish locale: Fixed an issue that caused Zero Stop to fail.
          • Fixed an issue when copy jobs using a paper size other than A3, A4, A5, LEGAL, LETTER,SIZE_11x17 were incorrectly charged as A4.
          • Added a detailed message with required actions when PaperCut MF is being registered on the device for the first time and native device authentication is already enabled and detected.
          • Fixed an issue that failed to uninstall PaperCut MF from the device, displaying the message "MiddleAuthServer".
        • Reports: Fixed an issue on the "User print/copy/scan/fax - breakdown" report that incorrectly reported color scan jobs as grayscale.
        • Integrated Scanning: Added more detail and clarity to the error message on the Device Details page when enabling Integrated Scanning on devices that do not support browser authentication applications.

Lexmark (LeSF) version 2.5.0*:

      • Fixed an issue preventing copying on devices with firmware version 040.087.
      • Fixed an occasional issue that incorrectly logged users in to PaperCut MF and access the native device functions as a "guest" when the device was inactive while the cursor was on the PIN/ Password field.
      • Fixed an issue when using the the device's hard "Start" key that incorrectly authenticated users to log in to PaperCut MF as a "guest".
      • Improved resilience to network connectivity issues.
      • The config key ext-device.lexmark.approved-actions now accepts wild cards as a valid input value.
      • Added the following new config keys:

        Description

        Config key

        Non-Android devices (eSF 2.1 - 4.4): Enable support for multiple third party applications (such as Lexmark Solution Composer) that require access to user credentials. device.lexmark.login.perform-auth
        Android devices (eSF 5+): Display the logout icon on the native device home screen. ext-device.lexmark.logout.display-icon

Ricoh (SDK/J) version 6.0.4*:

      • Fixed an issue that prevented the embedded application from being installed via the Remote Operation Client.
      • Fixed an issue that sometimes caused Integrated Scanning Zero Stop to fail when using a payment gateway.
      • Basque translations are now available.

Ricoh (SmartSDK) version 2.1.1*:

      • Added support for Integrated Scanning.
      • Added tracking for printing from USB.
      • Added support for setting the user's PIN at the device panel if the user does not already have a PIN assigned.
      • Added the ability to use the numeric keypad for ID number and account code.
      • Added the ability to prevent the panel from going to sleep when card authentication is enabled.
      • Added the ability to customize the logo.
      • Fixed an issue that prevented LAN-fax jobs from being sent.
      • Shared accounts: Added the ability to enter comments and invoicing details when selecting a shared account at the device panel.
      • Fixed an issue where the locale override was not applied to the submitted time for print jobs.
      • Fixed an issue causing Zero Stop to be triggered based on the most expensive job type rather than the current job type.
      • Fixed an occasional issue that caused buttons on the Print Release screen to become unresponsive.
      • Fixed an occasional issue that logged users out of PaperCut MF, and not the device functions, when the panel sleep function failed to work.
      • Fixed a layout issue on the Print Release screen of the device when using the Portuguese language.
      • Ricoh Remote Operation Client 1.2.2:
        • SDK/J authentication is now disabled when configuring the Remote Operation Client.
        • "Print & Delete Scanner Journal" is now automatically set to "Delete Oldest".
        • Updated the bundled RXOP library to version 3.5.16.
      • Added the following new config keys:

        Description

        Config key

        Display print job costs on the PaperCut MF Print Release screen and the Job Details screen. ext-device.ricoh.release-show-cost
        Permit the use of a configured list of third-party SDK/J applications when a user selects Device Functions. ext-device.ricoh.permission-product-ids
        Customize screen colors. ext-device.ricoh.accent-color
        ext-device.ricoh.primary-color
        Customize the login welcome message. ext-device-msg.welcome-text

Samsung (XOA) version 1.4.0*:

      • Added the logged in user's username to all screen footers.

Sharp (OSA):

      • Fixed an issue that incorrectly allowed users to access the device's web interface.

Toshiba eConnect:

      • Fixed an issue that incorrectly allowed users to access the device's web interface.

Toshiba (MDS):

      • Added the following new config keys:

        Description

        Config key

        Enable access to third party applications on the PaperCut MF Home screen. ext-device.toshiba.app-buttons.enabled
        ext-device.toshiba.app-button1.label
        ext-device.toshiba.app-button1.url
        ext-device.toshiba.app-button2.label
        ext-device.toshiba.app-button2.url
        Suppress the display of the PaperCut MF Print Release screen after login when there are no held print jobs. ext-device.toshiba.skip-release-screen-when-no-jobs
        Suppress the display of the PaperCut MF Home screen after login. ext-device.toshiba.device-functions-on-login
        Display print job costs on the PaperCut MF Print Release screen and the Job Details screen. ext-device.toshiba.release-show-cost

Xerox (EIP):

    • First generation devices: Fixed a formatting issue when the Account Selection screen is translated.
    • EIP 1.5+: VersaLink and AltaLink devices: Fixed an issue that incorrectly locked the device, preventing subsequent users from being able to log in, when the logout button on a PaperCut MF screen was repeatedly pressed by the current user.

Other Notes:

  • If you are running v17.2.1 or later, there is NO database upgrade.
  • **All Web Print sandbox servers must be updated to apply the default behavior of the config key (i.e. disabling document macros by default).
  • Devices marked with * require installing an updated version of the embedded software to access new features and fixes.